Hot-Cut Pneumatic Knifeholder
MT-A710
Introduce
MT-A710 hot-cut type knife-holder adopts the air pressure design to control the downstroke, equipped with a special heating blade that can process the slitting and melt simultaneously. The knife holder is provided with compact dimensions, rapid rising/cooling temperature, and highly stable slitting quality. Unlike conventional heating methods, MT-A710 can be heated to the required temperature within 1 minute, significantly saving warm-up time. It can also be cooled down to room temperature within a few minutes, to prevent the operator from inadvertently touching the blade to get hurt. MT-A710 can also be operated with MT-A710C the temperature controller optionally. MT-A710C using the SSR method by PID controller can control the working temperature much more precisely, ensuring the consistency of the slitting quality.
Model MT-A710
Min. slit width 13mm
Max. slit speed 20M/min(1)
Down-stroke 0~14mm
Air pressure 2~6/kg/cm²
Blade hardness HRC53°~HRC58°
Blade voltage DC12V
Blade current 10A
Blade power 120W
Working temp. 50~600 °C
Guide-bar GB01/GB02/GB04
Feature Fast heating/cooling
Good thermal insulation
Stable slitting quality
Adjustable down-stroke
Compact design
Suitable Nylon / Teolon / Material with knitting need to slit and melt up the
edge to prevent material separate.
PP / PE flim plastic material etc. , slitting need to melt up two
; layers together.
Drawing
(1) The maximum slitting speed is according to the actual materials, thickness and slitting results.
Not Like
Everyone Else
High-Efficiency,
High-Performance
Exceptional
Functionality
Attention to Detail
More
Precisely Control
The Absolute
Protagonist
Recommend
Crush Cut Knives
Precision blade
Each blade will undergo special precision grinding and control of each blade's roundness to reach +/-0.005mm before the product leaves our factory. The precision blade with fine grinding hardness backing roller and through A310/A310H half-cut knife holder depth adjusting allows you to cut as depth as you want.
Guide-bar
GB05
GB05 is the new generation of the Guide-Bar series. It has the advantage of the linear guideway groove, side-fixed installation, lightweight, and fast delivery. Besides, there are two lengths of guide-bar to choose from, 2000mm and 2400mm.
Crush Cut Knives
130T Unibody Zigzag knife
The 130 teeth zigzag blade is made of tool steel (SKD-11) imported from Europe, processed by well heat treatment to increase its mechanical properties such as toughness and wear resistance. The blade tip is precisely ground to maintain an equal tooth pitch and peak, the slitting edge will generate the zigzag notch, to facilitate tearing along the notch. The zigzag blade is suitable for easy-tear applications such as medical tapes.
Bearing
5.0mm/6.2mm Bearing
Bearings for score blade, there are two different model , 697ZZ is for 5.0mm thickness and 17mm inner diameter score blade ; 6900RS is for 6.2mm thickness and 22mm inner diameter.
Copyright © 2018 Motoknife All rights reserved.
